JX-SM4200-4×4 CNC Machining Center Gantry Type Tenon And Mortise Machine

It is suitable for the processing of tenon-and-mortise structures on inclined surfaces of any angle, arc surfaces, and tenon heads.

This model is developed by our company in the field of mahogany furniture and new Chinese furniture.

Feature:

1. Conventional Fixture	The clamp is accurate and easy to operate. Maximum material width: 180mm
2. Tiger Tonon Flip Fixture	One clamping can complete the milling of two vertical faces and one end face, reducing the number of clamping. Maximum clamping thickness: 120mm Maximum clamping width: 120mm Length: 350-550mm Flip angle: 0°-90°
3. Rotating fixture	This fixture can clamp the material and complete the milling on two vertical planes in one clamping, reducing the number of clamping and improving the processing efficiency. Maximum material thickness: 110mm Maximum gripping length: 2400mm Flip angle: 0°-90°
4. Round bar fixture	This fixture is suitable for the processing of tenon and mortise structures such as tenongrooves on the are surface of round bar workshop. Driven by servo motor, it can be rotated and positioned 360°.
5. 90° Flip jig	This fixture can complete the drilling and milling of the two vertical faces of the round table or the standard square wood material at one time; the round table: Maximum clamping thickness: 50mm Maximum width:120mm length (can be selected according to the maximum diameter of the round table)
6. Zong angle tenon fixture	This fixture is suitable for the machining of concrete structures with large amount of chips and special-shaped workpieces. Maximum material thickness: 120mm Maximum material width: 120mm